App Installation Procedure
Google Play store
To install the ATS GeoSuite application simply navigate to the Google Play Store and search for "ATS GeoSuite". Then follow the provided instructions to install the application.
Click the link below to go directly to the ATS GeoSuite Play Store Listing.
Mobile Device Requirements
The ATSGeoSuite Application has been designed to be used on the following devices:
- The Samsung Galaxy S4
- The Samsung Galaxy S5
- The Samsung Galaxy S6
- The Samsung Galaxy S7
The ATSGeoSuite Application is designed to run on the following operating systems
- Android 5.0
- Android 5.0.1
- Android 5.1.0
- Android 6.0.1
If you choose to install the ATS GeoSuite App on any other device make, model or type, you do so at your own risk.
Should you choose to install the ATS GeoSuite Application on any other device other than the ones listed here, the ATSGeoSuite Application requires the following absolute minimum mobile device hardware and sensor specifications to operate.
- Android 5.0 or higher
- 16 Gigabyte of storage memory
- 2000 Megabyte of device memory
- An external, four pole, audio jack capable of stereo audio output and a mono audio recording input.
- A GPS sensor
- A MEMS type magnetometer sensor (otherwise known as a compass sensor)
- A MEMS type accelerometer sensor
- A MEMS type gyroscopic sensor
- WiFi connectivity
- Edge, 3G, HSDPA, HSDPA+ or LTE connectivity
- An internet connection with data use enabled sim card or data enabled WiFi
Even if the device has met all of these requirements, the ATSGeoSuite cannot be guarantied to install or run correctly on the target device.
How to Manually install the ATS GeoSuite App
If you have received the ATS.apk installation file form a source other than the Google Play Store, you will have to follow the following instructions to install the ATS GeoSuite App on your device. Simply load the ATS.apk file onto any publicly available folder on your device and launch the installation process by tapping on the file.
If you have not already set your android device to accept installations from unknown sources then the following message will appear.
Select the "Settings" option.
Now click on the "Unknown Sources" checkbox.
A warning will appear detailing the risks of installing from an unknown source. Select the "OK" option.
A window will open asking the user if they wish to install the ATS app. Select the "Next" option.
Now select the "Install" option.
The Installation progress will then show until the Installation is complete.
When complete, the user may choose to immediately open the ATS GeoSuite App by selecting the "Open" option, or exiting the installation program by selecting the "Done" option. The app icon will now appear on your device "Apps" menu. To launch the app, simply touch the ATS app icon.